|
盒子内截图
各位前辈好
朋友给了一个mybooklive duo的空盒子，盒子给我前是能正常使用的。我自己的一块1T硬盘放到盒子里面，并按方法2重装系统（用my book live duo的固件，用方法2 的sh脚本）。
重装后，可以用http://mybookliveduo/UI/访问到盒子界面，可以在里面直行“恢复出厂设置”和“重启等操作”，但是始终硬盘空间显示为0，提示“数据卷加载失败，储存设备故障”。然后盒子红灯常亮
请教这种情况怎么办，谢谢，操作如下
root@ubuntu:/mnt/usb# bash ./debricker.sh /dev/sdb rootfs.img destroy
********************** DISK **********************
script will use the following disk:
Model: KINGSHAR KS-HDD160 (scsi)
Disk /dev/sdb: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
3 15.7MB 528MB 513MB primary
1 528MB 2576MB 2048MB ext3 primary raid
2 2576MB 4624MB 2048MB ext3 primary raid
4 4624MB 1000GB 996GB primary
is this REALLY the disk you want? [y] y
********************** IMAGE **********************
swap.c:12:1: warning: return type defaults to ‘int’ [-Wimplicit-int]
main(int argc, char *argv[])
^
swap.c: In function ‘main’:
swap.c:32:9: warning: implicit declaration of function ‘lseek64’ [-Wimplicit-function-declaration]
if (lseek64(fd, offset, 0) < 0LL) {
^
********************** IMPLEMENTATION **********************
everything is now prepared!
device: /dev/sdb
image_img: rootfs.img
destroy: true
this is the point of no return, continue? [y] y
32+0 records in
32+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0.0820438 s, 409 MB/s
32+0 records in
32+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0.56959 s, 58.9 MB/s
32+0 records in
32+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0.0481245 s, 697 MB/s
32+0 records in
32+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 0.555603 s, 60.4 MB/s
Testing with pattern 0x00: done
Reading and comparing: done
GNU Parted 3.2
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) mklabel gpt
(parted) mkpart primary 528M 2576M
(parted) mkpart primary 2576M 4624M
(parted) mkpart primary 16M 528M
(parted) mkpart primary 4624M -1M
(parted) set 1 raid on
(parted) set 2 raid on
(parted) quit
Information: You may need to update /etc/fstab.
Warning: blocksize 65536 not usable on most systems.
mke2fs 1.42.13 (17-May-2015)
mkfs.ext4: 65536-byte blocks too big for system (max 4096)
Proceed anyway? (y,n) y
Warning: 65536-byte blocks too big for system (max 4096), forced to continue
Creating filesystem with 15191280 64k blocks and 15144960 inodes
Filesystem UUID: 40ce2dc6-11b8-4a59-8a7c-d2013d530da1
Superblock backups stored on blocks:
65528, 196584, 327640, 458696, 589752, 1638200, 1769256, 3210872,
5307768, 8191000
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
destroying was done, would you like to continue with installation? [y] y
mdadm: size set to 1999808K
mdadm: array /dev/md0 started.
mke2fs 1.42.13 (17-May-2015)
Creating filesystem with 499952 4k blocks and 125184 inodes
Filesystem UUID: ae17d1f9-3039-402c-987e-7033d3043938
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Checking for bad blocks (read-only test): 0.00% done, 0:00 elapsed. (0/0/0 errdone
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
mdadm: added /dev/sdb2
synchronize raid... done
copying image to disk...
3999616+0 records in
3999616+0 records out
2047803392 bytes (2.0 GB, 1.9 GiB) copied, 212.391 s, 9.6 MB/s
mdadm: stopped /dev/md0
all done! device should be debricked!
|
|
淘帖
云币0
贡献19
活跃0
精华
