LSI直通卡SAS2获取不到硬盘

部署环境

24盘热拔插服务器+VMWARE ESXI6.7+联想SAS扩展卡+直通LSI2008+直通U.2 NVME+直通M.2 NVME+VMXNET3

系统总线

      tc@box:~$ lspci -tvnn-[0000:00]-+-00.0  Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190]
         +-01.0-[01]--
         +-07.0  Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110]
         +-07.1  Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111]
         +-07.3  Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
         +-07.7  VMware Virtual Machine Communication Interface [15ad:0740]
         +-0f.0  VMware SVGA II Adapter [15ad:0405]
         +-10.0  LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072]
         +-11.0-[03]----03.0  VMware SATA AHCI controller [15ad:07e0]
         +-15.0-[04]----00.0  VMware VMXNET3 Ethernet Controller [15ad:07b0]
         +-16.0-[0c]----00.0  Intel Corporation PCIe Data Center SSD [8086:0953]
         +-17.0-[14]----00.0  VMware VMXNET3 Ethernet Controller [15ad:07b0]
         +-18.0-[1c]----00.0  Silicon Motion, Inc. Device [126f:2262]

model.conf内容

[System Enclosure]
VENDOR = QNAP
MODEL = TS-453B
CAP=0x161cdb9c
MAX_DISK_NUM = 26
[Boot Enclosure]
VENDOR = QNAP
MODEL = BOOT
MAX_DISK_NUM = 1
[Boot Disk 1]
DISK_DRV_TYPE = ATA
DEV_BUS = B00

07:F1
DEV_PORT = 0
[System Disk 1]
DEV_BUS = B00

16:F0
DEV_PORT = 0
SLOT_NAME = Disk 1
[System Disk 2]
DEV_BUS = B00

16:F0
DEV_PORT = 1
SLOT_NAME = Disk 2
[System Disk 3]
DEV_BUS = B00

16:F0
DEV_PORT = 2
SLOT_NAME = Disk 3
[System Disk 4]
DEV_BUS = B00

16:F0
DEV_PORT = 3
SLOT_NAME = Disk 4
[System Disk 5]
DEV_BUS = B00

16:F0
DEV_PORT = 4
SLOT_NAME = Disk 5
[System Disk 6]
DEV_BUS = B00

16:F0
DEV_PORT = 5
SLOT_NAME = Disk 6
[System Disk 7]
DEV_BUS = B00

16:F0
DEV_PORT = 6
SLOT_NAME = Disk 7
[System Disk 8]
DEV_BUS = B00

16:F0
DEV_PORT = 7
SLOT_NAME = Disk 8
[System Disk 9]
DEV_BUS = B00

16:F0
DEV_PORT = 8
SLOT_NAME = Disk 9
[System Disk 10]
DEV_BUS = B00:D16:F0
DEV_PORT = 9
SLOT_NAME = Disk 10
[System Disk 11]
DEV_BUS = B00:D16:F0
DEV_PORT = 10
SLOT_NAME = Disk 11
[System Disk 12]
DEV_BUS = B00:D16:F0
DEV_PORT = 11
SLOT_NAME = Disk 12
[System Disk 13]
DEV_BUS = B00:D16:F0
DEV_PORT = 12
SLOT_NAME = Disk 13
[System Disk 14]
DEV_BUS = B00:D16:F0
DEV_PORT = 13
SLOT_NAME = Disk 14
[System Disk 15]
DEV_BUS = B00:D16:F0
DEV_PORT = 14
SLOT_NAME = Disk 15
[System Disk 16]
DEV_BUS = B00:D16:F0
DEV_PORT = 15
SLOT_NAME = Disk 16
[System Disk 17]
DEV_BUS = B00:D16:F0
DEV_PORT = 20
SLOT_NAME = Disk 17
[System Disk 18]
DEV_BUS = B00:D16:F0
DEV_PORT = 21
SLOT_NAME = Disk 18
[System Disk 19]
DEV_BUS = B00:D16:F0
DEV_PORT = 22
SLOT_NAME = Disk 19
[System Disk 20]
DEV_BUS = B00:D16:F0
DEV_PORT = 23
SLOT_NAME = Disk 20
[System Disk 21]
DEV_BUS = B00:D16:F0
DEV_PORT = 31
SLOT_NAME = Disk 21
[System Disk 22]
DEV_BUS = B00:D16:F0
DEV_PORT = 30
SLOT_NAME = Disk 22
[System Disk 23]
DEV_BUS = B00:D16:F0
DEV_PORT = 29
SLOT_NAME = Disk 23
[System Disk 24]
DEV_BUS = B00:D16:F0
DEV_PORT = 28
SLOT_NAME = Disk 24
[System Disk 25]
DISK_DRV_TYPE = M_2
DEV_BUS = B00:D22:F0
DEV_PORT = 0
PCI_SWITCH_PORT = 0
DISK_FORM_TYPE = PD_FORM_M_2_PCIE
SLOT_NAME = M.2 SSD 1
[System Disk 26]
DISK_DRV_TYPE = M_2
DEV_BUS = B00:D24:F0
DEV_PORT = 0
PCI_SWITCH_PORT = 0
DISK_FORM_TYPE = PD_FORM_M_2_PCIE
SLOT_NAME = M.2 SSD 2
[System Network 1]
DEV_BUG = B00:D23:F0
DEV_PORT = 0
[System Network 2]
DEV_BUG = B00:D21:F0
DEV_PORT = 0

当前现象

安装QTS TS-X53B_20220531-5.0.0.2055 可进入web界面
两个虚拟万兆可识别到，配置IP可以通
M.2和U.2可识别到
LSI直通卡上的SATA和SAS硬盘没有认到

已有操作

vmx配置文件增加SAS卡的直通类型为PCI(pciPassthru0.virtualDev = "pci")，指定总线id号为独立总线16
服务器开机过程进入LSI的SAS管理界面查看sas topology可看到硬盘（Control下有slot28~slot31，expander下有bay0~bay19）

情况如上，请技术大佬指导指导，先在此谢过。

LSI直通卡SAS2获取不到硬盘

#楼主# 2022-8-29 02:44

关于作者

楼主新帖

分享到：

个人中心