• 那是云首页
  • 快捷导航
  • 更多
    设为首页收藏本站
      网站通知公告
    • |
发帖
花生壳

unraid 安装威联通 无法启动

威联通 QNAP  / 求助大神  / 倒序浏览   © 著作权归作者本人所有

  • 回帖数

    2

  • 浏览数

    1663

  • 收藏数

    0

发帖

#楼主# 2023-6-12 23:23

跳转到指定楼层
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02)

[Boot Disk 1]
DISK_DRV_TYPE = ATA   
DEV_BUS =B0031:F2  
DEV_PORT = 0


启动盘设置对了， 为什么一直进不去呢 弄了好几天了
  1. 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
  2. 00:01.0 VGA compatible controller: Red Hat, Inc. QXL paravirtual graphic card (rev 05)
  3. 00:02.0 PCI bridge: Red Hat, Inc. Device 000c
  4. 00:02.1 PCI bridge: Red Hat, Inc. Device 000c
  5. 00:02.2 PCI bridge: Red Hat, Inc. Device 000c
  6. 00:02.3 PCI bridge: Red Hat, Inc. Device 000c
  7. 00:07.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
  8. 00:07.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
  9. 00:07.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
  10. 00:07.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
  11. 00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
  12. 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02)
  13. 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
  14. 01:00.0 Ethernet controller: Red Hat, Inc Virtio network device (rev 01)
  15. 02:00.0 Communication controller: Red Hat, Inc Virtio console (rev 01)
  16. 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8125 (rev 05)
复制代码

  1. [System Enclosure]
  2. VENDOR = QNAP
  3. MODEL = TS-264C
  4. CAP=0x12141b9c
  5. MULTI_CONF_FORMAT = 1
  6. MAX_DISK_NUM = 6
  7. MAX_FAN_NUM = 0
  8. MAX_TEMP_NUM = 2
  9. MAX_NET_PORT_NUM = 10
  10. INTERNAL_NET_PORT_NUM = 4
  11. MAX_PCIE_SLOT = 2
  12. CPU_TEMP_UNIT = DTS:1
  13. SYSTEM_TEMP_UNIT=EC
  14. SIO_DEVICE = IT8528  
  15. PWR_RECOVERY_UNIT = EC
  16. PWR_RECOVERY_CMOS_STORE =0x70,0x61
  17. BUZZER_CMOS_STORE = 0x70,0x63
  18. BOARD_SN_DEVICE = NET
  19. ETH_MAC_DEVICE = NET
  20. DISK_DRV_TYPE = ATA
  21. DISK_DEFAULT_MAX_LINK_SPEED = PD_SATA_SAS_6G
  22. SYSTEM_DISK_CACHEABLE_BITMAP = 0x7E
  23. SS_MAX_CHANNELS = 40
  24. SS_FREE_CHANNELS = 40
  25. EUP_STATUS = EC
  26. QA_PORT_SUPPORT = 1
  27. LCM_BAUDRATE = 115200

  29. [System FAN]
  30. FAN_UNIT = EC
  31. FAN_1=I1
  32. FAN_2=I2
  33. FAN_LEVEL_0 = 0
  34. FAN_LEVEL_1 = 70
  35. FAN_LEVEL_2 = 90
  36. FAN_LEVEL_3 = 110
  37. FAN_LEVEL_4 = 130
  38. FAN_LEVEL_5 = 150
  39. FAN_LEVEL_6 = 200
  40. FAN_LEVEL_7 = 250
  41. HEAT_SOURCE = SYS, CPU, DISK

  43. [System EDID 1]  
  44. DEV_BUS = B00:D02:F0
  45. DEV_PORT = 0

  47. [System PCIE SLOT 1]      
  48. DEV_BUS = B00:D02:F0
  49. PCI_SWITCH_PORT = 3

  51. [System IO]
  52. RESET_BUTTON = EC
  53. USB_COPY_BUTTON = EC
  54. STATUS_GREEN_LED = EC
  55. STATUS_RED_LED = EC
  56. VPD_MB = EC
  57. VPD_BP = EC
  58. LOCATE_LED = EC
  59. FRONT_USB_LED = EC
  60. LED_BV_INTERFACE = EC
  61. LED_BV_CTRL = PWM
  62. EDID_COUNT=2
  63. VOICE_ALERT_SUPPORT = 1

  65. [System Disk 1]
  66. DEV_BUS = B00:D31:F2
  67. DEV_PORT = 0  
  68. [System Disk 2]
  69. DEV_BUS = B00:D31:F2
  70. DEV_PORT = 1
  71. [System Disk 3]
  72. DEV_BUS = B00:D31:F2
  73. DEV_PORT = 3
  74. [System Disk 4]
  75. DEV_BUS = B00:D31:F2
  76. DEV_PORT = 4
  77. [System Disk 5]
  78. DEV_BUS = B00:D31:F2
  79. DEV_PORT = 5

  81. [System Network 1]
  82. DEV BUS=B01:D00:F0  
  83. DEV PORT=0

  85. [System Network 2]
  86. DEV BUS=B03:D00:F0
  87. DEV PORT=1

  89. [Usb Enclosure]
  90. VENDOR = QNAP
  91. MODEL = USB
  92. MAX_PORT_NUM = 7
  93. USB3_PORT_BITMAP = 0xFE
  94. EXT_PORT_NUM = 2

  96. [Usb Port 1]
  97. DEV_BUS = B00:D07:F7
  98. DEV_PORT = 1
  99. [Usb Port 2]
  100. DEV_BUS = B00:D07:F7
  101. IN_HUB = 1
  102. DEV_PORT = 4
  103. HUB_PORT = 2
  104. [Usb Port 3]
  105. DEV_BUS = B00:D07:F7
  106. IN_HUB = 1
  107. DEV_PORT = 3
  108. HUB_PORT = 2
  109. [Usb Port 4]
  110. DEV_BUS = B00:D07:F7
  111. IN_HUB = 1
  112. DEV_PORT = 2
  113. HUB_PORT = 2
  114. [Usb Port 5]
  115. DEV_BUS = B00:D07:F7
  116. IN_HUB = 1
  117. DEV_PORT = 1
  118. HUB_PORT = 2
  119. [Usb Port 6]
  120. DEV_BUS = B00:D07:F7
  121. DEV_PORT_SS = 2
  122. [Usb Port 7]
  123. DEV_BUS = B00:D07:F7
  124. DEV_PORT_SS = 1

  126. [Boot Enclosure]
  127. VENDOR = QNAP
  128. MODEL = BOOT
  129. MAX_DISK_NUM = 1

  131. [Boot Disk 1]
  132. DISK_DRV_TYPE = ATA  
  133. DEV_BUS =B00:D31:F2
  134. DEV_PORT = 0

  136. [System I2C]  
  137. DEV_BUS = B00:D31:F3
  138. DEV_PORT = 0

  140. [System Memory]  
  141. MAX_CHANNEL_NUM = 2
  142. MAX_SLOT_NUM = 4
  143. SLOT1_ADDR = 1, 0x50, I1
  144. SLOT2_ADDR = 1, 0x51, I1
  145. SLOT3_ADDR = 2, 0x52, I1
  146. SLOT4_ADDR = 2, 0x53, I1
复制代码



0
举报
那是云论坛 - 国内知名的NAS交流平台
http://www.nasyun.com
分享淘帖
回复 印象

使用道具

host2318

0

精华

38

回帖

368

积分

入门用户

Rank: 1

云币
0
贡献
2
活跃
338
精华
0 篇
host2318 发表于 2023-6-21 21:49 来自 中国广东广州
试试这个下面这样，精简的看能否进入.第一个sata口是启动盘
  1. [System Enclosure]
  2. VENDOR = QNAP
  3. MODEL = TS-264C
  4. CAP=0x12141b9c
  5. MAX_DISK_NUM = 6


  8. [System Disk 1]
  9. DEV_BUS = B00:D31:F2
  10. DEV_PORT = 1  
  11. [System Disk 2]
  12. DEV_BUS = B00:D31:F2
  13. DEV_PORT = 2
  14. [System Disk 3]
  15. DEV_BUS = B00:D31:F2
  16. DEV_PORT = 3
  17. [System Disk 4]
  18. DEV_BUS = B00:D31:F2
  19. DEV_PORT = 4
  20. [System Disk 5]
  21. DEV_BUS = B00:D31:F2
  22. DEV_PORT = 5

  24. [System Network 1]
  25. DEV BUS=B01:D00:F0  
  26. DEV PORT=0

  28. [System Network 2]
  29. DEV BUS=B03:D00:F0
  30. DEV PORT=1

  32. [Usb Enclosure]
  33. VENDOR = QNAP
  34. MODEL = USB
  35. MAX_PORT_NUM = 7
  36. USB3_PORT_BITMAP = 0xFE
  37. EXT_PORT_NUM = 2

  39. [Usb Port 1]
  40. DEV_BUS = B00:D07:F7
  41. DEV_PORT = 1
  42. [Usb Port 2]
  43. DEV_BUS = B00:D07:F7
  44. IN_HUB = 1
  45. DEV_PORT = 4
  46. HUB_PORT = 2
  47. [Usb Port 3]
  48. DEV_BUS = B00:D07:F7
  49. IN_HUB = 1
  50. DEV_PORT = 3
  51. HUB_PORT = 2
  52. [Usb Port 4]
  53. DEV_BUS = B00:D07:F7
  54. IN_HUB = 1
  55. DEV_PORT = 2
  56. HUB_PORT = 2
  57. [Usb Port 5]
  58. DEV_BUS = B00:D07:F7
  59. IN_HUB = 1
  60. DEV_PORT = 1
  61. HUB_PORT = 2
  62. [Usb Port 6]
  63. DEV_BUS = B00:D07:F7
  64. DEV_PORT_SS = 2
  65. [Usb Port 7]
  66. DEV_BUS = B00:D07:F7
  67. DEV_PORT_SS = 1

  69. [Boot Enclosure]
  70. VENDOR = QNAP
  71. MODEL = BOOT
  72. MAX_DISK_NUM = 1

  74. [Boot Disk 1]
  75. DISK_DRV_TYPE = ATA  
  76. DEV_BUS =B00:D31:F2
  77. DEV_PORT = 0
复制代码


点评

nsyunyun
我现在改成 windows 主系统了， 用vmware ， 可以帮忙看看吗 ， 我都打算放弃了  详情 回复 发表于 2023-6-22 22:54
回复 支持 反对 印象

使用道具 举报

nsyunyun

0

精华

13

回帖

162

积分

入门用户

Rank: 1

云币
0
贡献
10
活跃
103
精华
0 篇
nsyunyun 发表于 2023-6-22 22:54 来自 中国
host2318 发表于 2023-6-21 21:49
试试这个下面这样，精简的看能否进入.第一个sata口是启动盘

我现在改成 windows 主系统了， 用vmware ， 可以帮忙看看吗 ， 我都打算放弃了
  1. 这是 lspci
  2. 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
  3. 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
  4. 00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
  5. 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
  6. 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
  7. 00:07.7 System peripheral: VMware Virtual Machine Communication Interface (rev 10)
  8. 00:0f.0 VGA compatible controller: VMware SVGA II Adapter
  9. 02:00.0 USB controller: VMware USB1.1 UHCI Controller
  10. 02:01.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
  11. 02:02.0 Multimedia audio controller: Ensoniq ES1371/ES1373 / Creative Labs CT2518 (rev 02)
  12. 02:03.0 USB controller: VMware USB2 EHCI Controller

  14. 这是 lspci -vtnn
  15. -[0000:00]-+-00.0  Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190]
  16.            +-01.0-[01]--
  17.            +-07.0  Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110]
  18.            +-07.1  Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111]
  19.            +-07.3  Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
  20.            +-07.7  VMware Virtual Machine Communication Interface [15ad:0740]
  21.            +-0f.0  VMware SVGA II Adapter [15ad:0405]
  22.            +-11.0-[02]--+-00.0  VMware USB1.1 UHCI Controller [15ad:0774]
  23.            |            +-01.0  Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) [8086:100f]
  24.            |            +-02.0  Ensoniq ES1371/ES1373 / Creative Labs CT2518 [1274:1371]
  25.            |            \-03.0  VMware USB2 EHCI Controller [15ad:0770]

  27. 这是我的 model  ， 我精简了 ，参考了你的
  28. [System Enclosure]
  29. VENDOR = QNAP
  30. MODEL = TS-264C
  31. CAP=0x12141b9c
  32. MAX_DISK_NUM = 6


  35. [System Disk 1]
  36. DEV_BUS = B00:D07:F1
  37. DEV_PORT = 1  
  38. [System Disk 2]
  39. DEV_BUS = B00:D07:F1
  40. DEV_PORT = 2

  42. [System Network 1]
  43. DEV BUS=B02:D01:F0  
  44. DEV PORT=0


  47. [Usb Enclosure]
  48. VENDOR = QNAP
  49. MODEL = USB
  50. MAX_PORT_NUM = 7
  51. USB3_PORT_BITMAP = 0xFE
  52. EXT_PORT_NUM = 2

  54. [Usb Port 1]
  55. DEV_BUS = B02:D00:F0
  56. DEV_PORT = 1
  57. [Usb Port 2]
  58. DEV_BUS = B02:D00:F0
  59. DEV_PORT = 2


  62. [Boot Enclosure]
  63. VENDOR = QNAP
  64. MODEL = BOOT
  65. MAX_DISK_NUM = 1

  67. [Boot Disk 1]
  68. DISK_DRV_TYPE = ATA  
  69. DEV_BUS =B00:D07:F1
  70. DEV_PORT = 0
复制代码
回复 支持 反对 印象

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关于作者

nsyunyun

入门用户

  • 主题

    5

  • 帖子

    18

  • 关注者

    3

加好友 发私信

楼主新帖

etsme
快速回复 返回列表 搜索 官方QQ群
懒人地图| 手机版|小黑屋| 智能生活 , 上那是云 |闽ICP备2020018196号-1 |网站地图
Discuz! X3.4 Licensed Comsenz Inc.