nmgzhj 发表于 2014-11-20 19:54 这是哪里出问题了， |
not_a_mail 发表于 2014-11-14 00:11 WDMyCloud:~# parted -l Model: ATA WDC WD30EFRX-68E (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 3 15.7MB 528MB 513MB linux-swap(v1) primary 1 528MB 2576MB 2048MB ext3 primary raid 2 2576MB 4624MB 2048MB ext3 primary raid 5 4624MB 4724MB 99.6MB primary 6 4724MB 4824MB 101MB primary 7 4824MB 4826MB 1049kB primary 8 4826MB 4828MB 2097kB primary 4 4828MB 3001GB 2996GB ext4 primary Model: Linux Software RAID Array (md) Disk /dev/md0: 2048MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2048MB 2048MB ext3 WDMyCloud:~# mke2fs -n /dev/sda4 mke2fs 1.42.5 (29-Jul-2012) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 182853632 inodes, 731387904 blocks 36569395 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 22321 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848, 512000000, 550731776, 644972544 WDMyCloud:~# e2fsck -b 32768 /dev/sda4 e2fsck 1.42.5 (29-Jul-2012) /dev/sda4 contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes |
michael_wang9 发表于 2014-11-11 20:46 e2fsck -b 32768 /dev/sda4 注意空格啊 |
michael_wang9 发表于 2014-11-11 20:46 是的 我是一起选y |
|
请问，到最后一步，选择“y”就行了吗？ WDMyCloud:~# e2fsck -b 32768/dev/sda4 Usage: e2fsck [-panyrcdfvtDFV] [-b superblock] [-B blocksize] [-I inode_buffer_blocks] [-P process_inode_size] [-l|-L bad_blocks_file] [-C fd] [-j external_journal] [-E extended-options] device Emergency help: -p Automatic repair (no questions) -n Make no changes to the filesystem -y Assume "yes" to all questions -c Check for bad blocks and add them to the badblock list -f Force checking even if filesystem is marked clean -v Be verbose -b superblock Use alternative superblock -B blocksize Force blocksize when looking for superblock -j external_journal Set location of the external journal -l bad_blocks_file Add to badblocks list -L bad_blocks_file Set badblocks list WDMyCloud:~# y -bash: y: command not found |
not_a_mail 发表于 2014-11-8 22:00 没看明白，我的也是同样问题，具体怎么操作请指教一下，谢谢 |
not_a_mail 发表于 2014-11-8 22:00 恭喜la ~  |
linyoujie 发表于 2014-11-8 11:38 成功了，去wd论坛找了一下，解决了 http://community.wd.com/t5/WD-My ... nt/m-p/633817#M2471 |
not_a_mail 发表于 2014-11-8 11:36 通过镜像恢复 数据都会在 亲身经历 但是不保证哦 |
组图打开中，请稍候......